Clicky

Types of Beam Bridges

Types of Beam Bridges

The function of the beam bridge is to pass through the barrier. A beam bridge should be built where it is difficult or impossible to get from one place to another.

I-beam bridges can have single free-standing spans up to 25 feet long and 16 feet wide. I-Beam bridges are constructed with the same FRP members as our long-span, truss-style bridges. This provides significant cost savings compared to short-span truss-style bridges.

Many different designs of bridges serve a specific purpose. Bridges are built for a specific purpose in different situations. Bridge designs vary depending on various factors, such as the work of the bridge, the construction of the bridge, and its location. In addition, it depends on the material used to build the bridge and its quality.

Some Famous Beam Bridges are:

  1. Donghai Bridge.
  2. King Fahd Causeway (Bridges)
  3. Forth Bridge
  4. Tokyo Gate Bridge.
  5. Ikitsuki Bridge.
  6. Howrah Bridge.
  7. Iron Bridge.
  8. Quebec Bridge.

What Is a Beam Bridge?

The Beam Bridge is also known as the Second Stringer Bridge. The design for this type of beam is fairly simple structural. It is supported by an abutment or pier at each end.

A beam bridge is a commonly used bridge. A Beam bridge is a type of girder bridge. The bridge’s main purpose is to provide a way to go from one end to the other. A beam bridge is the simplest and cheapest type of bridge.

The most basic form of beam bridge consists of a horizontal beam, supported by piers or abutments at each end. In this type of bridge, the weight of the beam pushes directly down on the pillars or abutment.

This type of beam should be strong enough not to bend under force due to its own weight and traffic. When compression force is applied to a load beam. Then the top edge of the beam feels compression. And tension force is applied to the bottom edge.

At the beginning of the bridge, simple beam bridges were made of wooden planks or stone slabs. Bridges in modern infrastructure are usually made of steel or reinforced concrete or a combination of both. Materials like solid reinforced, precast concrete or post-tensioned, etc. can be used. Modern bridges include girder, plate girder, girder bridges, etc. in beam bridges.

The costs of concrete I-beam bridges vary more widely compared to the costs of steel plate girders and rolled steel beam bridges. The price of concrete I-beam bridges can range from $100/sq. ft to approximately $580/sq. ft,

Precast Concrete Bridge Beams Sizes

  1. Typical depths: 16 to 40 in.
  2. Typical widths: 12 to 24 in.
  3. Typical span-to-depth ratios: 10 to 20

Types of Beam Bridges

Beam bridges are categorized according to the criteria and as required in different situations. These are as follows.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top
Scroll to Top