Netgear Extender Setup Guide - Configure your Netgear Range Extender

Netgear Extenders work as boosters to your network connection. They eradicate all the dead signal zones becoming the barrier to signal. Moreover, it provides the users excellent connectivity or strong signal. People using it in large places where the connection is the biggest problem are quite happy with its results.


We recommend our readers to choose Netgear Extenders as they make you have an outstanding experience. However, to begin using the device at your place, you will have to make sure that you have a successful Netgear Extender Setup.


Go through this reading till the end to know the process for Netgear Extender Setup.

Netgear Extender Setup Procedure

Usually, the Netgear Extender is a perfect companion that escalates your internet experience. Using this device, one can multiply the internet connectivity a number of times. Also, it helps in providing connectivity in each and every corner of your place. However, to make the best use of this product, one needs to have an error-free Netgear Extender Setup. You can proceed to do it through Mywifiext. We have mentioned the detailed process below.

Preparation:

  • First, you need to set up the product. For this, you need to put the extender out of the box. Then, unpack the same.

  • After that, pair the antennas to it. You will find the same with the box itself.

  • Next, plug the extender into an electrical source.

  • Remember, you must connect the Netgear Extender near to your router.


Switching It On:

  • Now, you have to turn the Netgear Extender's power ON to proceed with the process of your Netgear Extender Setup.

  • Hence, search for the power button and push the same.

  • Also, make sure that the power light of your extender is flashing when you switch it ON.

  • However, if the light does not flash, then push the button again or try the same process after plugging the extender to a new electrical socket.


Connecting It to Your System:

  • Now, you will have to establish a connection between your computer and the Netgear Extender.

  • Hence, you will have to choose between the wired and non-wired connection.

  • You are recommended to go as per your convenience with this step.

  • However, make sure that you opt for the default SSID to establish the connection for the wireless option.

  • If you go with the wired option, then only the use of a USB cable will serve the purpose.


Launch the Mywifiext Window:

  • Following this, you will have to run any of the preferred web browsers.

  • Hence, click on the respective icon.

  • As a result, the browser's navigation screen will turn up in front of you.

  • Here, you must input the Netgear Extender Setup window's web address. For this, enter the URL 'mywifiext' in your browser's search bar.

  • Also, make sure that there is a strong internet connection while you are searching this URL. The respective page requires a robust network to load on the screen.


Account Sign In:

  • Now, the Netgear Extender Setup window will appear on your system's screen.

  • Select the 'New Extender Setup' option on that window.

  • Further, open the Terms & Conditions link.

  • Go through the same or read carefully.

  • After that, a screen with a sign in option will open.

  • Hence, type the relevant credentials and complete the process carefully.

  • Remember, the first time users will have to go through the Netgear Genie account window first. Hence, we advise you to put all the required information and proceed next.


Network Selection:

  • Once you sign in to the account, the Netgear installation assistance window will start navigating for the available network connections.

  • As a result, a list will open on your screen.

  • Here, you will find 2 different bandwidths. Hence, you can choose the preferred one that you wish to extend. Do not forget to select its radio button.

  • After that, input the network security key.


Extended Connection Configuration:

  • Now, the next window will prompt you to configure the extended network connection.

  • For this, input the SSID and your network's password. Also, make sure that the entries you make are correct to avoid errors.

  • Remember, you will find the default SSID on your router with '_2ext' or '_5ext.'

  • You can make modifications in the same as per your preference.


Process Confirmation:

  • Once the configuration part is complete, you will have to tap on the option ‘next.’

  • After that, click to confirm the process.

  • As a result, the Netgear installation assistance window will take some time to save the settings that you have made.

  • Hence, you are advised to wait till its completion.


Relocation of Your Netgear Extender:

  • After you follow the above points, you must unplug the Netgear Extender.

  • Now, plug the same to a new location that you find the ideal for it.

You must prefer an area which should be between the router and the system as it will ensure that you had a smooth Netgear Extender Setup.

We have simplified the entire process of Netgear Extender Setup for you. Now, you can proceed with its setup without facing any hassle.